Electra One mk3

Every port. Every route. A screen to build the interface for it.

The next full-size Electra One: USB, MIDI IO, and Ethernet with RTP MIDI and OSC, routes you script yourself with a visual interface for them, an 8-inch touchscreen with stunning graphics, and one processing core dedicated to low-latency MIDI messaging.

€599 excl. VAT

On pre-order. Shipping before the end of February 2027. Full payment at checkout.

Six years of experience turned into a flagship MIDI controller. Ultra-low latency, stunning graphics, all connectivity you will ever need, and premium build quality.

USB Device, USB Host, 5-pin MIDI in and out, and an Ethernet port carrying RTP MIDI, OSC, MIDI 2.0. Routing latency under 1msec configured on the controller or scripted in Lua. With USB host supporting up to 8 connected devices, the mk3 runs one of the most flexible MIDI routers on the market.
A 1280 × 800 display. The extra room goes to easier navigation and direct page changes, around the same preset grid as known from mk1 and mk2. No more mk2 style swiping. Graphics rebuilt from the ground up on hardware acceleration: smooth, anti-aliased shapes for controls and text at a much higher frame rates.
Push-button rotary high-resolution encoders, the same ones used on Mini. This sets mk3 further apart from the mk2. Every knob is touch-sensitive and presets can act on both, all events under your control. Six tactile and assignable buttons

For detailed information about the controller and working with it, visit the Electra One mk2 User Guide →

Electra One mk3 beside an Electra One mk2 on a wooden desk, both showing an image on their screens

Electra One mk3 seen face on, its display showing a page of synthesizer parameters with names and values

The mk3 enclosure in CAD: the body, the front panel and the glass drawn apart from each other

At a glance

Controls: 12 push-button touch-sensitive rotary high-resolution encoders, 6 tactile hardware buttons
Display: 8-inch touchscreen, 1280 × 800, 5ms touch response
Graphics: Fast, hardware-accelerated and anti-aliased graphics
Connectivity: USB-C device, USB-C host, 2x 5-pin MIDI IO, Ethernet with RTP MIDI and OSC
USB Host: Up to 8 connected USB devices
Preset storage: SD card
Presets run at once: 12+
Processor: Dual-core Renesas RA8D2, 1 GHz, one core dedicated to low-latency MIDI messaging
Memory: 64 MB unified RAM
Enclosure: New enclosure with a real-wood back panel
Power: USB powered
Dimensions: 206 × 189 × 38 mm (8.1 × 7.4 × 1.5 in)

Good to know

Electra One mk3 is still in development, updated pictures will be provided as we progress. The controller is on pre-order, shipping before the end of February 2027. Because mk3 has a new enclosure, IO board and mainboard, an existing mk2 cannot be upgraded to mk3.

VESA mount compatible. The stand shown in the photographs is not included.